Does anyone have or know someone that has some old aluminum hemi intake roller rockers made by BMS. I have a complete set of exhaust but need 6 more intakes to complete the set for a project. The two I have are 1.5:1 ratio but will consider a set of 1.6:1 intakes if someone has lying around and wants to get rid of them. They were made by Bobs Machine Service out of Ohio in the 1980's and 90's until he passed away. They should have BMS engraved in them and should be red anodized.

just sold a bunch to a guy... but may have some more..... i will let you know tonight when I get to the house.

Not sure if the name you have is right or not, I believe it was Billet Machine Specialist. Either way though I am sure we are talking of the same rockers. I had all but one rocker several years ago and after hours of research I tracked down the original owners family. They had a significant amount of inventory remaining and they were kind enough to go through it and sell me a few to give me a complete set + extras. They then mentioned they were interested in selling the cadd files and the remaining inventory, but I didnt act quit enough and it went to ebag. I lost the bid with just a few seconds left, but I believe the individual that ended up with it got everything. He was selling the BMS design stands on Ebay for a while but not sure if he still is or not. If you would like I could dig around and see if I still have his contact information or figure out whom it was if you would like.

You're probably correct on the name of the company. I got it from a post from 2 years ago. Still need to find some. Thanks