Sheetmetal recommendations - Moparts Forums

Register Log In Moparts Forums Moparts Restoration & A12 Forum Sheetmetal recommendations

Print Thread

Sheetmetal recommendations #1153201 01/08/12 11:09 PM 01/08/12 11:09 PM
Joined: Jan 2010 Posts: 23 Colorado HCPBill OP member
HCPBill OP member Joined: Jan 2010 Posts: 23 Colorado	I am shopping for rear quarter skins and front inner and outer fenders for my 71 Cuda project. Year One sent a 25% off offer to me and that is looking pretty good but I would like to know what suppliers and brands you folks would recommend. I am looking for the best parts, not the cheapest. THANKS! Bill 7008849-strippingprep10-7-11.jpg (46 downloads) 27 years in NHRA Super Stock racing driving the "High Country Plymouth" 'Cuda SS/FA 440+6

Re: Sheetmetal recommendations [Re: HCPBill] #1153202 01/08/12 11:21 PM 01/08/12 11:21 PM
Joined: Jan 2010 Posts: 90 north carolina usa B beeson44 member
beeson44 member B Joined: Jan 2010 Posts: 90 north carolina usa	AMD for sure.I have used it all at my shop and amd has been the best.

Re: Sheetmetal recommendations [Re: HCPBill] #1153203 01/08/12 11:24 PM 01/08/12 11:24 PM
Joined: Jan 2004 Posts: 27,347 Today? Who Knows? 1_WILD_RT Management Trainee
1_WILD_RT Management Trainee Joined: Jan 2004 Posts: 27,347 Today? Who Knows?	Contact Jeff Brown up in Fort Collins, I think he's an AMD dealer.... 521 Restorations Fort Collins, Colorado (970) 227-0588 Last edited by 1_WILD_RT; 01/08/12 11:46 PM. "The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers."

Re: Sheetmetal recommendations [Re: HCPBill] #1153204 01/08/12 11:32 PM 01/08/12 11:32 PM
Joined: Jan 2003 Posts: 8,498 Candler,NC / Myrtle Beach, SC J JDMopar master
JDMopar master J Joined: Jan 2003 Posts: 8,498 Candler,NC / Myrtle Beach, SC	AMD...and you'll be better off using full quarters rather than skins.

Re: Sheetmetal recommendations [Re: HCPBill] #1153205 01/09/12 01:36 AM 01/09/12 01:36 AM
Joined: Dec 2007 Posts: 1,572 Jacksonville Florida elitecustombody pro stock
elitecustombody pro stock Joined: Dec 2007 Posts: 1,572 Jacksonville Florida	The next best thing to new OEM parts or nice used parts are AMD.If you need a quote, send me a list,I'll make sure you get best deal

Re: Sheetmetal recommendations [Re: JDMopar] #1153206 01/09/12 01:53 AM 01/09/12 01:53 AM
Joined: Jun 2008 Posts: 2,336 Ball Ground, Georgia Dixie top fuel
Dixie top fuel Joined: Jun 2008 Posts: 2,336 Ball Ground, Georgia	Quote: AMD...and you'll be better off using full quarters rather than skins. We'd be glad to give you a quote as well, if you'd like one. Dixie Restoration Parts Phone -(770) 975-9898 Phone Hours: M-F 10am-5pm EST website: www.dixierestorationparts.com email: mail@dixierestorationparts.com Veteran owned small business The Best Parts at a Fair Price.

Re: Sheetmetal recommendations [Re: Dixie] #1153207 01/09/12 04:10 AM 01/09/12 04:10 AM
Joined: Jan 2004 Posts: 27,347 Today? Who Knows? 1_WILD_RT Management Trainee
1_WILD_RT Management Trainee Joined: Jan 2004 Posts: 27,347 Today? Who Knows?	Randy @ Dixie & Stephan @ Elite are both good sources for AMD without a doubt, I mentioned Jeff because he's semi local... "The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers."

Re: Sheetmetal recommendations [Re: HCPBill] #1153208 01/09/12 10:04 PM 01/09/12 10:04 PM
Joined: Feb 2006 Posts: 180 Chicagoland cudastruction member
cudastruction member Joined: Feb 2006 Posts: 180 Chicagoland	I agree with AMD parts. I just finished the sheetmetal portion of my resto and the AMD parts were really nice fits. I have purchased a part or two from all the guys listed and I would buy from any of them again. Al

Re: Sheetmetal recommendations [Re: cudastruction] #1153209 01/10/12 01:34 AM 01/10/12 01:34 AM
Joined: Jan 2010 Posts: 23 Colorado HCPBill OP member
HCPBill OP member Joined: Jan 2010 Posts: 23 Colorado	Thanks for the recommendations. AMD it is. Bill 27 years in NHRA Super Stock racing driving the "High Country Plymouth" 'Cuda SS/FA 440+6

Re: Sheetmetal recommendations [Re: HCPBill] #1153210 01/10/12 01:56 AM 01/10/12 01:56 AM
Joined: Jan 2003 Posts: 1,758 KS 6 68SportSatvert top fuel
68SportSatvert top fuel 6 Joined: Jan 2003 Posts: 1,758 KS	Bill - Get with Jeff Brown in the Loveland area. He is an AMD distributor and a great guy as well! I've bought parts from him and he is a standup guy AND owns MOPARS.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1