Hemi fuel pump Question - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Hemi fuel pump Question

Print Thread

Hemi fuel pump Question #1112620 11/13/11 11:51 AM 11/13/11 11:51 AM
Joined: Apr 2011 Posts: 3 Ontario, Canada 7 72HemiCuda OP member
72HemiCuda OP member 7 Joined: Apr 2011 Posts: 3 Ontario, Canada	Hi Guys 2 years ago I dropped the 426 hemi out of my Cuda. Just put it back in today and I can't remember which inlet on the mechanical fuel pump the fuel line from the gas tank goes to. The inlet on the pump that is closer to the front of the car points straight down and the inlet just behind it is at a 90 degree angle. Any help would be much appreciated.

Re: Hemi fuel pump Question [Re: 72HemiCuda] #1112621 11/13/11 03:06 PM 11/13/11 03:06 PM
Joined: Aug 2003 Posts: 43,211 Bend,OR USA C Cab_Burge I Win
Cab_Burge I Win C Joined: Aug 2003 Posts: 43,211 Bend,OR USA	Clamp the pump in a vise(very carefully) and pump the fuel pump arm, lever, see which side sucks and which side has pressure If I'm remembering correctly the lower holes is the inlet side and the upper hole is the outlet Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)

Re: Hemi fuel pump Question [Re: Cab_Burge] #1112622 11/13/11 03:30 PM 11/13/11 03:30 PM
Joined: Apr 2011 Posts: 3 Ontario, Canada 7 72HemiCuda OP member
72HemiCuda OP member 7 Joined: Apr 2011 Posts: 3 Ontario, Canada	I have already installed the engine with the pump on it. Is there any way of telling which is the inlet when it is on the engine without having to remove it. I can't see any markings on the pump

Re: Hemi fuel pump Question [Re: 72HemiCuda] #1112623 11/13/11 04:01 PM 11/13/11 04:01 PM
Joined: Jan 2003 Posts: 9,436 Blair County,PA 62maxwgn master
62maxwgn master Joined: Jan 2003 Posts: 9,436 Blair County,PA	Back is in,front is out.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1