Cutters for porting cast iron heads? - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Cutters for porting cast iron heads?

Print Thread

Page 2 of 2

1

2

Re: Cutters for porting cast iron heads? [Re: dodgeboy11] #1105802 11/06/11 11:28 AM 11/06/11 11:28 AM
Joined: Jan 2003 Posts: 3,059 Swamps of South Jersey. W wildcargo master
wildcargo master W Joined: Jan 2003 Posts: 3,059 Swamps of South Jersey.	A simple foot switch that you plug the grinder in will make it a lot easyer. I allso use a variac to slow the grinder downbut don't slow it to much it might hurt the grinder Bud www.wildcar-go.itgo.com 64 DODGE 60' 1.433, 1/8 6.38 at 107.4, 1/4 10.08 at 132.02 foot brake, leaf springs

Re: Cutters for porting cast iron heads? [Re: wildcargo] #1105803 11/06/11 01:34 PM 11/06/11 01:34 PM
Joined: Dec 2008 Posts: 176 Rome, GA G GTXX member
GTXX member G Joined: Dec 2008 Posts: 176 Rome, GA	In the past I've bought a lot of 15-20 new assorted shape carbide burrs off of ebay for $20 or so. A couple were not straight but still usuable at low speed, overall it was a bargain.

Page 2 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1