Summit 1 7/8 big block headers - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Summit 1 7/8 big block headers

Print Thread

Page 2 of 2

1

2

Re: Summit 1 7/8 big block headers [Re: rapom] #1087669 10/05/11 12:09 PM 10/05/11 12:09 PM
Joined: Jan 2003 Posts: 27,421 Balt. Md 3 383man Too Many Posts
383man Too Many Posts 3 Joined: Jan 2003 Posts: 27,421 Balt. Md	Quote: Well, whatever size header I run probably won't matter anyway as I'm going to be running 2 1/2" full exhaust so I would probably be ok with the elites. Sounds like I'll be running them as I have no desire to be cutting welding and drilling. I ran the Hedman 1-3/4 on my old 440 combo which I thought ran pretty good for what it was. A 440 with 906 heads I worked and the MP .557 cam along with your basic bolt on's. It ran an 11.49 @ 116 best. I also have an article somewhere around here from CPPA that has a test on a mild 440 where the 1-3/4 headers made the car faster in the 1/4 because of the better low end on the mild build. Ron Last edited by 383man; 10/05/11 12:10 PM.

Re: Summit 1 7/8 big block headers [Re: JohnRR] #1087670 10/05/11 04:41 PM 10/05/11 04:41 PM
Joined: Jan 2003 Posts: 1,883 Northern OH R rapom OP top fuel
rapom OP top fuel R Joined: Jan 2003 Posts: 1,883 Northern OH	I'm pretty sure he was talking about the 1 7/8" headers. but I will let him clarify.

Page 2 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1