Re: Had To Have My New Crank Turned
[Re: emarine01]
#1076237
09/19/11 08:29 PM
09/19/11 08:29 PM
|
Joined: Feb 2009
Posts: 1,532 off the grid
340B5
pro stock
|
pro stock
Joined: Feb 2009
Posts: 1,532
off the grid
|
I have finally decided to put an American to work, even if it is only for a couple hours. I'm going to buy a Callies, but it's real hard to spend 300 extra dollars when you don't have to. At least I'll have some piece of mind that I won't be participating in the carnage pics thread.
Yeah, it's got a smallblock.
|
|
|
Re: Had To Have My New Crank Turned
[Re: 340B5]
#1076238
09/19/11 10:23 PM
09/19/11 10:23 PM
|
Joined: Feb 2005
Posts: 28,312 Cincinnati, Ohio
Challenger 1
Too Many Posts
|
Too Many Posts
Joined: Feb 2005
Posts: 28,312
Cincinnati, Ohio
|
Quote:
I have finally decided to put an American to work, even if it is only for a couple hours.
I'm going to buy a Callies, but it's real hard to spend 300 extra dollars when you don't have to.
At least I'll have some piece of mind that I won't be participating in the carnage pics thread.
|
|
|
Re: Had To Have My New Crank Turned
[Re: MR_P_BODY]
#1076239
09/23/11 12:01 PM
09/23/11 12:01 PM
|
Joined: Jun 2003
Posts: 52,972 Romeo MI
MR_P_BODY
OP
Master
|
OP
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Well I got the crank back last night and I put it in this morning... spins nice and free... now I'll check the clearances and if it shows good then I'll start the assembly
|
|
|
Re: Had To Have My New Crank Turned
[Re: Crizila]
#1076241
09/23/11 01:55 PM
09/23/11 01:55 PM
|
Joined: Dec 2009
Posts: 1,074 detroit, mi
POS Dakota
super stock
|
super stock
Joined: Dec 2009
Posts: 1,074
detroit, mi
|
Quote:
Interesting read. Surprised no one has mentioned the shipper. I would venture to guess that more stuff gets damaged in shipping than you may think. Just because it went from the "factory" to you doesn't mean 10 other people haven't tossed it around in between. Just sent a box of lifters back to Summit a few days ago. They came out of their factory ( individual ) packaging and were all jumbled together in the bottom of the Summit box. Summit's packaging wasn't that swift, but the box looked like it had been dragged behind the UPS truck for a few thousand miles.
Same thing here with some brake parts I ordered. Thrown in a flimsy box with those stupid air bag things and parts all over the place. I was convinced I would be missing something through the hole in the side of the box, luckily not. I agree with the shippers being absolutely horrible, but the packing needs improvement as well.
I can totlaly see a crank being damaged this way.
|
|
|
Re: Had To Have My New Crank Turned
[Re: POS Dakota]
#1076242
09/23/11 02:17 PM
09/23/11 02:17 PM
|
Joined: Aug 2003
Posts: 11,179 Atco NJ
DJVCuda
I Live Here
|
I Live Here
Joined: Aug 2003
Posts: 11,179
Atco NJ
|
Quote:
I can totlaly see a crank being damaged this way.
The only aftermarket crank I ever bought was the BPE 4.125 - it was in a double coardboard box, inside was 2 bags of foam - one top and one bottom. It was not OOR when I checked it. I dont know what other manufacturers ship the cranks in but Rod's stuff was packaged right and it helped.
|
|
|
Re: Had To Have My New Crank Turned
[Re: DJVCuda]
#1076243
09/23/11 02:45 PM
09/23/11 02:45 PM
|
Joined: Jun 2003
Posts: 52,972 Romeo MI
MR_P_BODY
OP
Master
|
OP
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
It measured up good... I set it at .002 and .002 (mains and rods) with .007 end play.... I'm sure not use to 1/16" rings... man do they DRAG... I got 28 ft lbs to turn the assembly, my race stuff takes 18 ft lbs EDIT after playing with it I got the break away torque down to 24 ft lbs... those rings just drag alot
Last edited by MR_P_BODY; 09/23/11 09:54 PM.
|
|
|
Re: Had To Have My New Crank Turned
[Re: MR_P_BODY]
#1076244
09/23/11 02:48 PM
09/23/11 02:48 PM
|
Joined: Feb 2003
Posts: 3,456 Out West
408strokerdart
master
|
master
Joined: Feb 2003
Posts: 3,456
Out West
|
Quote:
It measured up good... I set it at .002 and .002 (mains and rods) with .007 end play.... I'm sure not use to 1/16" rings... man do they DRAG... I got 28 ft lbs to turn the assembly, my race stuff takes 18 ft lbs
Ft-lbs?
|
|
|
Re: Had To Have My New Crank Turned
[Re: DJVCuda]
#1076245
09/23/11 02:52 PM
09/23/11 02:52 PM
|
Joined: Jun 2005
Posts: 2,776 Ontario Canada
MattW
master
|
master
Joined: Jun 2005
Posts: 2,776
Ontario Canada
|
Quote:
Quote:
I can totlaly see a crank being damaged this way.
The only aftermarket crank I ever bought was the BPE 4.125 - it was in a double coardboard box, inside was 2 bags of foam - one top and one bottom. It was not OOR when I checked it. I dont know what other manufacturers ship the cranks in but Rod's stuff was packaged right and it helped.
I don't know Rob but sounds like he runs his business not have somebody else do it. So if a crank get banged up during shipping it is his dollar. Make sense to package well to avoid unneeded expenses.
|
|
|
Re: Had To Have My New Crank Turned
[Re: Performance Only]
#1076248
09/23/11 03:26 PM
09/23/11 03:26 PM
|
Joined: Mar 2009
Posts: 1,058 bigfork mn
dragram440
super stock
|
super stock
Joined: Mar 2009
Posts: 1,058
bigfork mn
|
I really dont think it makes any difference if the delivery guy drops the china crank or the american crank they will get bent either way and will cost the same to repair either one! Could someone point me in the direction of the carnage threads with the china cranks that can prove that it was actually the cranks fault. Has anyone ever had to do any work to correct there american made crank?
67' charger 499 RB
10.57 at 127
|
|
|
Re: Had To Have My New Crank Turned
[Re: dragram440]
#1076249
09/23/11 10:31 PM
09/23/11 10:31 PM
|
Joined: Dec 2009
Posts: 20,640 in a cattle trailer down by th...
Guitar Jones
Paddle faster! I hear banjo music!
|
Paddle faster! I hear banjo music!
Joined: Dec 2009
Posts: 20,640
in a cattle trailer down by th...
|
Quote:
I really dont think it makes any difference if the delivery guy drops the china crank or the american crank they will get bent either way and will cost the same to repair either one! Could someone point me in the direction of the carnage threads with the china cranks that can prove that it was actually the cranks fault. Has anyone ever had to do any work to correct there american made crank?
I can't point you in that direction but if my new stroker blows chunks I'm blaming the crank anyway.
Not like it was the fault of the hack that assembled it.
"Follow me the wise man said, but he walked behind"
'92 D250 Club Cab CTD, 47RH conversion, pump tweaks, injectors, rear disc and hydroboost conversion. '74 W200 Crew Cab 360, NV4500, D44, D60 and NP205 divorced transfer case. Rear disc and hydroboost coming soon! 2019 1500 Long Horn Crew Cab 4WD, 5.7 Hemi.
|
|
|
Re: Had To Have My New Crank Turned
[Re: 340B5]
#1076251
09/24/11 01:56 PM
09/24/11 01:56 PM
|
Joined: Jan 2003
Posts: 21,072 Niles , Ohio
therocks
oh wait.but hey.lets see.oh yeah.
|
oh wait.but hey.lets see.oh yeah.
Joined: Jan 2003
Posts: 21,072
Niles , Ohio
|
Last new Crank I bought was in a wooden box with supports for it.It was a Crank Shaft comp crank.Paid 40 bucks for it brand new.Wish I could find deals like that now.Rocky
Chrysler Firepower
|
|
|
Re: Had To Have My New Crank Turned... UPDATE
[Re: MR_P_BODY]
#1076252
09/24/11 04:29 PM
09/24/11 04:29 PM
|
Joined: Jun 2003
Posts: 52,972 Romeo MI
MR_P_BODY
OP
Master
|
OP
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Well this is what it looks like today... still need to do some clearance work on the valve covers(they hit the rockers at the lip)... I will order up the push rods next week... I'm going to have to use 5/16" push rods because I'm real close to hitting the intake ports... and I need to finish the pan
|
|
|
Re: Had To Have My New Crank Turned... UPDATE
[Re: DemonDust]
#1076254
09/24/11 05:18 PM
09/24/11 05:18 PM
|
Joined: Jun 2003
Posts: 52,972 Romeo MI
MR_P_BODY
OP
Master
|
OP
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Quote:
Looks good Mr P
FWIW..... I have all my cranks checked by my crank guy before I do anything with them.. Just peace of mind
This is the first crank I've had any problem with
|
|
|
Re: Had To Have My New Crank Turned... UPDATE
[Re: MR_P_BODY]
#1076255
09/24/11 05:29 PM
09/24/11 05:29 PM
|
Joined: Dec 2009
Posts: 20,640 in a cattle trailer down by th...
Guitar Jones
Paddle faster! I hear banjo music!
|
Paddle faster! I hear banjo music!
Joined: Dec 2009
Posts: 20,640
in a cattle trailer down by th...
|
Quote:
Well this is what it looks like today... still need to do some clearance work on the valve covers(they hit the rockers at the lip)... I will order up the push rods next week... I'm going to have to use 5/16" push rods because I'm real close to hitting the intake ports... and I need to finish the pan
Looks really good. I had a set of those super expensive valve covers and I sold them because they were sooo heavy.
"Follow me the wise man said, but he walked behind"
'92 D250 Club Cab CTD, 47RH conversion, pump tweaks, injectors, rear disc and hydroboost conversion. '74 W200 Crew Cab 360, NV4500, D44, D60 and NP205 divorced transfer case. Rear disc and hydroboost coming soon! 2019 1500 Long Horn Crew Cab 4WD, 5.7 Hemi.
|
|
|
|
|