live from dunn tire raceway buffalo ny
#1057673
08/19/11 10:01 PM
08/19/11 10:01 PM
|
Joined: Nov 2004
Posts: 3,544 Syracuse,NY
CompWedgeEngines
OP
master
|
OP
master
Joined: Nov 2004
Posts: 3,544
Syracuse,NY
|
We are at a quick 8 race, qualified #1-on a very short and somewhat tricky track.( short and very bumpy).bob backed out at 3.12 seconds and still ran a 3.97...we are almost ready for round 1....putting some more fuel to it now..altitude is dropping fast...here we go...
RIP Monte Smith
Your work is a reflection of yourself, autograph it with quality.
WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
|
|
|
Re: live from dunn tire raceway buffalo ny
[Re: Performance Only]
#1057677
08/19/11 11:58 PM
08/19/11 11:58 PM
|
Joined: Nov 2004
Posts: 3,544 Syracuse,NY
CompWedgeEngines
OP
master
|
OP
master
Joined: Nov 2004
Posts: 3,544
Syracuse,NY
|
Not much time, but we'te going into the finals...the other ast car,which has mike Janis' adrl motor in it just lost, so its us and another top dragster going for the $3000.
Off we go soon...then off to another quick 8 at noon tomorrow.
RIP Monte Smith
Your work is a reflection of yourself, autograph it with quality.
WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
|
|
|
Re: live from dunn tire raceway buffalo ny
[Re: Eric]
#1057682
08/20/11 12:36 AM
08/20/11 12:36 AM
|
Joined: Nov 2004
Posts: 3,544 Syracuse,NY
CompWedgeEngines
OP
master
|
OP
master
Joined: Nov 2004
Posts: 3,544
Syracuse,NY
|
The Chevy had nothing for the mopar tonight. A mopar victory !
RIP Monte Smith
Your work is a reflection of yourself, autograph it with quality.
WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
|
|
|
Re: live from dunn tire raceway buffalo ny
[Re: tboomer]
#1057688
08/20/11 06:55 PM
08/20/11 06:55 PM
|
Joined: Nov 2004
Posts: 3,544 Syracuse,NY
CompWedgeEngines
OP
master
|
OP
master
Joined: Nov 2004
Posts: 3,544
Syracuse,NY
|
We re here in Rochester, #1 qualifier,missed the tune up(3.90) but making some tune up changes for round one...weather and track conditions are changing fast...round 1 soon.
RIP Monte Smith
Your work is a reflection of yourself, autograph it with quality.
WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
|
|
|
Re: live from dunn tire raceway buffalo ny
[Re: pittsburghracer]
#1057691
08/20/11 09:44 PM
08/20/11 09:44 PM
|
Joined: Nov 2004
Posts: 3,544 Syracuse,NY
CompWedgeEngines
OP
master
|
OP
master
Joined: Nov 2004
Posts: 3,544
Syracuse,NY
|
It's us against a blown Chevy altered...we just tried the proverbial "kitchen sink" tune up..and we hazed the tires 660' so we are going back to a 3.90-4.00 tune up.
If we get by the altered we will have a Twin turbo 632" in the finals
RIP Monte Smith
Your work is a reflection of yourself, autograph it with quality.
WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
|
|
|
|
|