Re: engine assembly labor
[Re: Oyvind Mopar]
#1055054
08/19/11 09:36 PM
08/19/11 09:36 PM
|
Joined: Jul 2008
Posts: 30,454 Florida STAYcation
dOoC
The village idiot's idiot
|
The village idiot's idiot
Joined: Jul 2008
Posts: 30,454
Florida STAYcation
|
Quote:
But, you got a Hemi....Keep it living, too many Hemis went down the drain. The worst engines I work on are Hemis that have had multiple repairs/overhauls.
I agree 101% ....those HEMIroids are a PITA ! ...and many owners are the same way - 'specially ones in early Bee bodies with huffers on them.
I say ...charge them DOUBLE the labor-rate and let us poor-church-mice(with the lowly 413's and 440's) get-a-break on the machine work and labor rates ...
|
|
|
Re: engine assembly labor
[Re: HardcoreB]
#1055056
08/20/11 12:14 AM
08/20/11 12:14 AM
|
Joined: Feb 2003
Posts: 10,220 Someplace you aren't
SomeCarGuy
I Live Here
|
I Live Here
Joined: Feb 2003
Posts: 10,220
Someplace you aren't
|
Quote:
Quote:
800 is fair... you could ask for the cam degree job to be thrown in.
I agree...burn that bridge over $1-200. There are just some people you shouldn't do business with until their perception changes IMO. Let him take it to this other shop that is cheaper, I say.
You aren't a business guy and it shows. If the competition is charging less locally, any business owner will tell you that is what determines the price. Might not even be aware he is losing business over a small amount of $$$. That is what sways the buying public many times.
200 bucks for a degree job? Send them all to me.
|
|
|
Re: engine assembly labor
[Re: Performance Only]
#1055059
08/20/11 02:17 AM
08/20/11 02:17 AM
|
Joined: Feb 2003
Posts: 10,220 Someplace you aren't
SomeCarGuy
I Live Here
|
I Live Here
Joined: Feb 2003
Posts: 10,220
Someplace you aren't
|
Quote:
Quote:
Quote:
Quote:
800 is fair... you could ask for the cam degree job to be thrown in.
I agree...burn that bridge over $1-200. There are just some people you shouldn't do business with until their perception changes IMO. Let him take it to this other shop that is cheaper, I say.
You aren't a business guy and it shows. If the competition is charging less locally, any business owner will tell you that is what determines the price. Might not even be aware he is losing business over a small amount of $$$. That is what sways the buying public many times.
200 bucks for a degree job? Send them all to me.
really? so basically your saying everyone should shop by price alone? i think some people do that, others shop by reputation and experience. which would you rather have?
Depends. You were the one that was charging a ton for stuff a few years ago and got put off by others delivering quality work for much less. So I would expect your outlook to be different, based on the explosion you had then.
I deal w/ many different industries/trades in my work. It's always possible to find people doing quality work for less than you were paying for quality work. Not everyday, but if you keep an eye out, you will find what you need. Letting the same guy charge whatever he feels just 'cause he does good work is a good way to get gouged.
|
|
|
Re: engine assembly labor
[Re: sasquatch]
#1055060
08/20/11 02:24 AM
08/20/11 02:24 AM
|
Joined: Mar 2004
Posts: 781 MD
HEMI472
super stock
|
super stock
Joined: Mar 2004
Posts: 781
MD
|
if the machine shop does all the machine work on the engine and you get most or all of the parts from them i dont think thay should charge that much. if they did the machine work right it should bolt togather why should they check there own work?? and i havent found one yet with a warranty. but i have heard thousands of reasons why it blowed up.and none of them was because the builder or the machine shop screwed up
Last edited by HEMI472; 08/20/11 02:39 AM.
|
|
|
Re: engine assembly labor
[Re: sasquatch]
#1055061
08/20/11 02:28 AM
08/20/11 02:28 AM
|
Joined: Jul 2008
Posts: 30,454 Florida STAYcation
dOoC
The village idiot's idiot
|
The village idiot's idiot
Joined: Jul 2008
Posts: 30,454
Florida STAYcation
|
Quote:
Anybody on here know any rich machine shop owners? Most engine builders I know are barely getting by. We are charging the same rates for machine shop labor that we were almost 20 years ago and people still hollar. Most guys do it because we love it, it sure ain't for the cash and glory. Todd
BARELY GETTING BY ...on $ 50.00 PLUS an hour ? ...I would like some of that "action" ...
|
|
|
Re: engine assembly labor
[Re: dOoC]
#1055062
08/20/11 03:12 AM
08/20/11 03:12 AM
|
Joined: Nov 2008
Posts: 833 MN
hemidup
super stock
|
super stock
Joined: Nov 2008
Posts: 833
MN
|
Assembling an engine is a love of God and mine. Not by how much money you make in an hour. There's days I make money. There's days I break even. There's day's I loose money, just like tonight and can't sleep over a 350 hp 340 build.
Last edited by hemidup; 08/20/11 03:13 AM.
|
|
|
Re: engine assembly labor
[Re: hemidup]
#1055063
08/20/11 07:37 AM
08/20/11 07:37 AM
|
Joined: Jan 2003
Posts: 21,079 Niles , Ohio
therocks
oh wait.but hey.lets see.oh yeah.
|
oh wait.but hey.lets see.oh yeah.
Joined: Jan 2003
Posts: 21,079
Niles , Ohio
|
My machinist isnt getting rich.He makes a good living but he isnt rich.Doc 50 an hour sounds like big $$$$$.But there are expenses that have to be paid.The guy working at Gov Motors making 30 an hour and bennys for installing an emblem is doing better.That and when you add OT he makes more than 50 an hour.Now consider the shop owner has to pay taxes on the shop equipment SS FICA health insurance retirement property insurance and taxes etc.See how much comes out of that 50 an hour.Rocky
Chrysler Firepower
|
|
|
Re: engine assembly labor
[Re: SomeCarGuy]
#1055064
08/20/11 09:03 AM
08/20/11 09:03 AM
|
Joined: Jul 2010
Posts: 2,091 Delray beach, Florida
Performance Only
top fuel
|
top fuel
Joined: Jul 2010
Posts: 2,091
Delray beach, Florida
|
Quote:
Quote:
Quote:
Quote:
Quote:
800 is fair... you could ask for the cam degree job to be thrown in.
I agree...burn that bridge over $1-200. There are just some people you shouldn't do business with until their perception changes IMO. Let him take it to this other shop that is cheaper, I say.
You aren't a business guy and it shows. If the competition is charging less locally, any business owner will tell you that is what determines the price. Might not even be aware he is losing business over a small amount of $$$. That is what sways the buying public many times.
200 bucks for a degree job? Send them all to me.
really? so basically your saying everyone should shop by price alone? i think some people do that, others shop by reputation and experience. which would you rather have?
Depends. You were the one that was charging a ton for stuff a few years ago and got put off by others delivering quality work for much less. So I would expect your outlook to be different, based on the explosion you had then.
what in the world are you talking about? what kind of stuff and what explosion? have you been hanging around the fiberglass fumes with Doc or something?
speaking of Doc, you want some of the action for 50.00 an hour? go get some. i'm betting you have no idea of the investment it takes to equip a machine shop and keep the doors open. 500K will barely get you started with equipment, add the tooling and supplies, specialized hand tools, maintenance, rent, tangible taxes, employee payroll, (more taxes) electricity, chemicals, etc. etc. and see how that works out for you. you'll work the first 10 hours of the day just to meet expenses, if your lucky. at 50 .00 an hour you'll be out of business in a hurry.
machine shop owner and engine builder
|
|
|
Re: engine assembly labor
[Re: Performance Only]
#1055065
08/20/11 09:38 AM
08/20/11 09:38 AM
|
Joined: Feb 2005
Posts: 28,312 Cincinnati, Ohio
Challenger 1
Too Many Posts
|
Too Many Posts
Joined: Feb 2005
Posts: 28,312
Cincinnati, Ohio
|
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
800 is fair... you could ask for the cam degree job to be thrown in.
I agree...burn that bridge over $1-200. There are just some people you shouldn't do business with until their perception changes IMO. Let him take it to this other shop that is cheaper, I say.
You aren't a business guy and it shows. If the competition is charging less locally, any business owner will tell you that is what determines the price. Might not even be aware he is losing business over a small amount of $$$. That is what sways the buying public many times.
200 bucks for a degree job? Send them all to me.
really? so basically your saying everyone should shop by price alone? i think some people do that, others shop by reputation and experience. which would you rather have?
Depends. You were the one that was charging a ton for stuff a few years ago and got put off by others delivering quality work for much less. So I would expect your outlook to be different, based on the explosion you had then.
what in the world are you talking about? what kind of stuff and what explosion? have you been hanging around the fiberglass fumes with Doc or something?
speaking of Doc, you want some of the action for 50.00 an hour? go get some. i'm betting you have no idea of the investment it takes to equip a machine shop and keep the doors open. 500K will barely get you started with equipment, add the tooling and supplies, specialized hand tools, maintenance, rent, tangible taxes, employee payroll, (more taxes) electricity, chemicals, etc. etc. and see how that works out for you. you'll work the first 10 hours of the day just to meet expenses, if your lucky. at 50 .00 an hour you'll be out of business in a hurry.
50 bucks an hour is nothing, we charge $65. an hour for our labor at work and we are not getting rich. The computer guy charges 120 an hour...
|
|
|
Re: engine assembly labor
[Re: Performance Only]
#1055066
08/20/11 09:42 AM
08/20/11 09:42 AM
|
Joined: Dec 2007
Posts: 12,588 Great Neck,LI,new york
hemi-itis
I Live Here
|
I Live Here
Joined: Dec 2007
Posts: 12,588
Great Neck,LI,new york
|
I'll add a few more things What about the time put into a job that just is never billed?You might have 10 hours on a particular job and only bill for 10. The other thing is that @#$%^^& phone & peeps coming in the door You'll be lucky to get 4 hours outta an 10 hour day
HEMI-ITIS has no cure. My condition is fully BLOWN!!
|
|
|
Re: engine assembly labor
[Re: Performance Only]
#1055067
08/20/11 11:00 AM
08/20/11 11:00 AM
|
Joined: Aug 2009
Posts: 740 Anderson, IN
1969RR
super stock
|
super stock
Joined: Aug 2009
Posts: 740
Anderson, IN
|
speaking of Doc, you want some of the action for 50.00 an hour? go get some. i'm betting you have no idea of the investment it takes to equip a machine shop and keep the doors open. 500K will barely get you started with equipment, add the tooling and supplies, specialized hand tools, maintenance, rent, tangible taxes, employee payroll, (more taxes) electricity, chemicals, etc. etc. and see how that works out for you. you'll work the first 10 hours of the day just to meet expenses, if your lucky. at 50 .00 an hour you'll be out of business in a hurry.
:iagree I'll work out of my garage at home for $50.00 and hour....I own a business and have 7 employees, $50.00 an hour labor will in no way cover expenses. At $50.00 an hour, you will have all the WalMart mentality people with their "junk" beating down your doors! Then, come back complaining about everything!! I don't want that kind of work. The shop owner knows what he/she needs to make to be able to keep the doors open, so he/she will be there the next time you need them. How many times have you seen the "low ball", fly-by-nite, places come and go??? If you think shop A is too high, quit complaining, and go to shop B..he might be there the next time you need him....just my opinion. Jeff
|
|
|
Re: engine assembly labor
[Re: 1969RR]
#1055068
08/20/11 11:54 AM
08/20/11 11:54 AM
|
Joined: May 2008
Posts: 5,399 Aurora, Colorado
451Mopar
master
|
master
Joined: May 2008
Posts: 5,399
Aurora, Colorado
|
Quote:
speaking of Doc, you want some of the action for 50.00 an hour? go get some. i'm betting you have no idea of the investment it takes to equip a machine shop and keep the doors open. 500K will barely get you started with equipment, add the tooling and supplies, specialized hand tools, maintenance, rent, tangible taxes, employee payroll, (more taxes) electricity, chemicals, etc. etc. and see how that works out for you. you'll work the first 10 hours of the day just to meet expenses, if your lucky. at 50 .00 an hour you'll be out of business in a hurry.
:iagree I'll work out of my garage at home for $50.00 and hour....I own a business and have 7 employees, $50.00 an hour labor will in no way cover expenses. At $50.00 an hour, you will have all the WalMart mentality people with their "junk" beating down your doors! Then, come back complaining about everything!! I don't want that kind of work. The shop owner knows what he/she needs to make to be able to keep the doors open, so he/she will be there the next time you need them. How many times have you seen the "low ball", fly-by-nite, places come and go??? If you think shop A is too high, quit complaining, and go to shop B..he might be there the next time you need him....just my opinion. Jeff
Sorry I threw out the $50/hour rate. I was tring to say $800 to do a job that will likely take 16 hours is only $50/hour. I think someone else quoted 10 hours at $75, but noted it can take several more hours, but most shops will stay at the quoted price and not charge the extra time or consumables used.
The interesting part is the OP is supplying "all new parts". Because they are all new, and a stroker, the parts have never been fitted, checked, clearanced, corrected, ect, so it will take longer to assemble than if it was a rebuild.
Don't get me started on how our government is unfriendly to small business. We have taxed and regulated most manufacturing jobs out of the country.
|
|
|
Re: engine assembly labor
[Re: Performance Only]
#1055069
08/20/11 11:58 AM
08/20/11 11:58 AM
|
Joined: Feb 2003
Posts: 10,220 Someplace you aren't
SomeCarGuy
I Live Here
|
I Live Here
Joined: Feb 2003
Posts: 10,220
Someplace you aren't
|
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
800 is fair... you could ask for the cam degree job to be thrown in.
I agree...burn that bridge over $1-200. There are just some people you shouldn't do business with until their perception changes IMO. Let him take it to this other shop that is cheaper, I say.
You aren't a business guy and it shows. If the competition is charging less locally, any business owner will tell you that is what determines the price. Might not even be aware he is losing business over a small amount of $$$. That is what sways the buying public many times.
200 bucks for a degree job? Send them all to me.
really? so basically your saying everyone should shop by price alone? i think some people do that, others shop by reputation and experience. which would you rather have?
Depends. You were the one that was charging a ton for stuff a few years ago and got put off by others delivering quality work for much less. So I would expect your outlook to be different, based on the explosion you had then.
what in the world are you talking about? what kind of stuff and what explosion? have you been hanging around the fiberglass fumes with Doc or something?
You had a full meltdown explosion on here a few years back over engine labor costs. It was pretty funny.
|
|
|
Re: engine assembly labor
[Re: Performance Only]
#1055070
08/20/11 01:30 PM
08/20/11 01:30 PM
|
Joined: Jul 2008
Posts: 30,454 Florida STAYcation
dOoC
The village idiot's idiot
|
The village idiot's idiot
Joined: Jul 2008
Posts: 30,454
Florida STAYcation
|
Quote:
speaking of Doc, you want some of the action for 50.00 an hour? go get some. i'm betting you have no idea of the investment it takes to equip a machine shop and keep the doors open. 500K will barely get you started with equipment, add the tooling and supplies, specialized hand tools, maintenance, rent, tangible taxes, employee payroll, (more taxes) electricity, chemicals, etc. etc. and see how that works out for you. you'll work the first 10 hours of the day just to meet expenses, if your lucky. at 50 .00 an hour you'll be out of business in a hurry.
Dan .....
I would agree ...if you want to equip a machine-shop with the top-of-the-line 2012 equipment it might cost a little bit MORE than that. But who does that? ... NOT the wise business person.
The shop that I have used since I have been up-here uses old-school YESTERtech equipment that may not be as speedy as the new-stuff ... but is just a good -- it just takes a better operator.
I will bet that if all his old-school equipment sold at an auction ... it might be worth 30k$ ...and that is a stretch. There have been many auction/sales listing I have seen in the past couple of years ...and even stuff on CL ...
Sure .. you can spend 500k$ ... and you can buy a new building with 20k$ a month overhead .... but most do not do that if you want to stay-in-biz.
|
|
|
Re: engine assembly labor
[Re: SomeCarGuy]
#1055071
08/20/11 01:46 PM
08/20/11 01:46 PM
|
Joined: Jul 2010
Posts: 2,091 Delray beach, Florida
Performance Only
top fuel
|
top fuel
Joined: Jul 2010
Posts: 2,091
Delray beach, Florida
|
[quote You had a full meltdown explosion on here a few years back over engine labor costs. It was pretty funny.
you obviously have me mixed up with somebody else. do a search and find it...
machine shop owner and engine builder
|
|
|
|
|