w2 intakes - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech w2 intakes

Print Thread

w2 intakes #1043262 07/30/11 06:05 PM 07/30/11 06:05 PM
Joined: Nov 2009 Posts: 86 ms W w2dak394 OP member
w2dak394 OP member W Joined: Nov 2009 Posts: 86 ms	Anyone got any real numbers on et difference on intakes. Now I'm running holley strip dom. intake. Ready to improve, wanted to hear from you guys.

Re: w2 intakes [Re: w2dak394] #1043263 07/30/11 06:09 PM 07/30/11 06:09 PM
Joined: Jun 2003 Posts: 52,972 Romeo MI MR_P_BODY Master
MR_P_BODY Master Joined: Jun 2003 Posts: 52,972 Romeo MI	I switched to a Indy W-2 ... I believe it was the best manifold I put on for a single 4 bbl

Re: w2 intakes [Re: w2dak394] #1043264 07/30/11 06:49 PM 07/30/11 06:49 PM
Joined: Feb 2005 Posts: 20,185 PA. pittsburghracer "Little"John
pittsburghracer "Little"John Joined: Feb 2005 Posts: 20,185 PA.	I just ported a Victor W2 for my 408 and the flow numbers on the intake came way up. I can't wait to try it out. 1970 Duster Edelbrock headed 408 5.984@112.52 422 Indy headed small block 5.982@112.56 mph 9.42@138.27 Livin and lovin life one day at a time

Re: w2 intakes [Re: pittsburghracer] #1043265 07/30/11 07:34 PM 07/30/11 07:34 PM
Joined: Jan 2003 Posts: 6,146 Melbourne , Australia LA360 master
LA360 master Joined: Jan 2003 Posts: 6,146 Melbourne , Australia	I wouldn't use anything other than the Indy intake Alan Jones

Re: w2 intakes [Re: w2dak394] #1043266 07/30/11 08:23 PM 07/30/11 08:23 PM
Joined: Feb 2006 Posts: 501 CEDAR RAPIDS Plymouth340 mopar
Plymouth340 mopar Joined: Feb 2006 Posts: 501 CEDAR RAPIDS	went from victor to a indy....o8 quicker....indy is the best..amen

Re: w2 intakes [Re: Plymouth340] #1043267 07/31/11 11:15 AM 07/31/11 11:15 AM
Joined: Aug 2003 Posts: 4,988 new jersey usa 1 11secdart master
11secdart master 1 Joined: Aug 2003 Posts: 4,988 new jersey usa	I had a blended Strip Dominator and switched to an out of the box Victor and it was something like 12 hp better on the dyno. I inquired about switching to an Indy intake on here and was told by the small block guru on here that it wasn`t worth the change. However starting from scratch or going from a Strip Dominator it was. 68 Dart 410 / 904 92 D150 original owner 21 Ram 1500 Quad Cab, Big Horn , Hemi ,4x4 23 Audi Q5 16 Honda HRV

Re: w2 intakes [Re: w2dak394] #1043268 07/31/11 12:27 PM 07/31/11 12:27 PM
Joined: May 2004 Posts: 12,396 Taxes & Virus's R-US, NY Dragula I Live Here
Dragula I Live Here Joined: May 2004 Posts: 12,396 Taxes & Virus's R-US, NY	Which intake is this one? It came with a heat riser under the plenum, and I milled it off and welded it back up....The opening for the carb was off an 1/8" as well and I opened up the runners a little. '70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft) https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car) https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car) https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9) '66 Barracuda AWB Stretched nose Blown 440 Car in build stage '71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph https://www.youtube.com/watch?v=Znuo3jMUXTk

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1