Previous Thread
Next Thread
Print Thread
Page 1 of 3 1 2 3
Launch RPMs.... #1027178
07/06/11 11:18 AM
07/06/11 11:18 AM
Joined: Jan 2003
Posts: 25,969
United Socialist States of Ame...
T
tboomer Offline OP
Too Many Posts
tboomer  Offline OP
Too Many Posts
T

Joined: Jan 2003
Posts: 25,969
United Socialist States of Ame...
What are you guys launching of your tranny brake at? I have been letting go of the button at 4600..I have been thinking about going down a bit till I can get a handle on this thing...What do ya think? Ted


Need your rear end checked out? Contact Grizzly!!
Re: Launch RPMs.... [Re: tboomer] #1027179
07/06/11 11:27 AM
07/06/11 11:27 AM
Joined: Apr 2007
Posts: 2,028
Trumbull,CT.
J
jim sciortino Offline
top fuel
jim sciortino  Offline
top fuel
J

Joined: Apr 2007
Posts: 2,028
Trumbull,CT.
Very combination specific....

Sneak up on it to sort out any issues.

Re: Launch RPMs.... [Re: tboomer] #1027180
07/06/11 11:38 AM
07/06/11 11:38 AM
Joined: Jun 2003
Posts: 52,972
Romeo MI
MR_P_BODY Offline
Master
MR_P_BODY  Offline
Master

Joined: Jun 2003
Posts: 52,972
Romeo MI
That will change the reaction time Ted... so what
do you need to do with the RT... higher RPM and you
come off the line harder(unless you spin)... I dont
use a launch chip... I go right up on the stall of
the conv(5600 in my case).... keep playing with it
till you find the happy point

Re: Launch RPMs.... [Re: jim sciortino] #1027181
07/06/11 11:40 AM
07/06/11 11:40 AM
Joined: Sep 2003
Posts: 2,008
Sweet Home Alabama
M
MRMOPAR622 Offline
top fuel
MRMOPAR622  Offline
top fuel
M

Joined: Sep 2003
Posts: 2,008
Sweet Home Alabama
I would go down as low as I could without killing the 60'.The lower you can leave at the easier it is on everything.If you only lose a .01 or .02 no problem leaving @ a lower RPM,but now a .10 that can be a problem.

Most important have "Fun" and "Enjoy" and then the Wins will follow.


"To Be The Man'You Have Got To Beat The Man" "T/D and Pro-Bracket Racer"
Re: Launch RPMs.... [Re: MR_P_BODY] #1027182
07/06/11 11:43 AM
07/06/11 11:43 AM
Joined: Oct 2009
Posts: 1,288
Oregon
sg66mopar Offline
pro stock
sg66mopar  Offline
pro stock

Joined: Oct 2009
Posts: 1,288
Oregon
Quote:


keep playing with it
till you find the happy point





Bracket racing I'll let mine stall at aroung 4600 on the stop.

Super Gas racing it's all in at around 6500.

Like Mr. P said, your RT will change (a lot) so you need to find the point you like then leave it alone.

Re: Launch RPMs.... [Re: sg66mopar] #1027183
07/06/11 11:50 AM
07/06/11 11:50 AM
Joined: Jan 2003
Posts: 25,969
United Socialist States of Ame...
T
tboomer Offline OP
Too Many Posts
tboomer  Offline OP
Too Many Posts
T

Joined: Jan 2003
Posts: 25,969
United Socialist States of Ame...
I think my biggest problem is when the car comes up into the air,is that I am jerking the steering wheel to the left...Jimmy says I should tape the steering wheel center...It makes a neat pic with the wheels up but tough to control!

6716422-006.JPG (141 downloads)

Need your rear end checked out? Contact Grizzly!!
Re: Launch RPMs.... [Re: tboomer] #1027184
07/06/11 11:54 AM
07/06/11 11:54 AM
Joined: Jan 2003
Posts: 25,969
United Socialist States of Ame...
T
tboomer Offline OP
Too Many Posts
tboomer  Offline OP
Too Many Posts
T

Joined: Jan 2003
Posts: 25,969
United Socialist States of Ame...


Need your rear end checked out? Contact Grizzly!!
Re: Launch RPMs.... [Re: tboomer] #1027185
07/06/11 12:05 PM
07/06/11 12:05 PM
Joined: Jun 2003
Posts: 52,972
Romeo MI
MR_P_BODY Offline
Master
MR_P_BODY  Offline
Master

Joined: Jun 2003
Posts: 52,972
Romeo MI
Your turning the wheel... it didnt make a move till
it came back down... I assume you use your left hand
on the wheel and dont rest your arm/brace it and when
you launch your arm pulls the wheel some(to the left)...
I brace my left arm on the door/window sill

Re: Launch RPMs.... [Re: MR_P_BODY] #1027186
07/06/11 12:09 PM
07/06/11 12:09 PM
Joined: Jan 2003
Posts: 25,969
United Socialist States of Ame...
T
tboomer Offline OP
Too Many Posts
tboomer  Offline OP
Too Many Posts
T

Joined: Jan 2003
Posts: 25,969
United Socialist States of Ame...
Great idea,Mike! I may try that..Also when the front got aligned,it took some slop out of the steering..We are going into points #5 and#6 this weekend...And I really need some rounds! You don't get any points winning buy backs...


Need your rear end checked out? Contact Grizzly!!
Re: Launch RPMs.... [Re: tboomer] #1027187
07/06/11 12:10 PM
07/06/11 12:10 PM
Joined: Jan 2003
Posts: 10,011
Frostbitefalls MN (Rocky&Bullw...
gregsdart Offline
I Live Here
gregsdart  Offline
I Live Here

Joined: Jan 2003
Posts: 10,011
Frostbitefalls MN (Rocky&Bullw...
It looks to me like a chassis problem causing at least some of the move to the left. Focus if you can on your steering wheel on launch. If you see that you are not turning the wheel a lot, then something is unloading the left rear tire a couple of feet after the hit. Short shocks? Wrong preload?
As far as rpm, I would start at 3,000 rpm and see where things are. 3,000 should give you a consistent leave, and let you know what you need for proper chassis reaction time.


8..603 156 mph best, 2905 lbs 549, indy 572-13, alky
Re: Launch RPMs.... [Re: gregsdart] #1027188
07/06/11 12:20 PM
07/06/11 12:20 PM
Joined: Jan 2003
Posts: 25,969
United Socialist States of Ame...
T
tboomer Offline OP
Too Many Posts
tboomer  Offline OP
Too Many Posts
T

Joined: Jan 2003
Posts: 25,969
United Socialist States of Ame...
Thanks,Greg! I need some different ideas...One thing I should say is that I have never scaled the car yet...


Need your rear end checked out? Contact Grizzly!!
Re: Launch RPMs.... [Re: tboomer] #1027189
07/06/11 12:31 PM
07/06/11 12:31 PM
Joined: Mar 2007
Posts: 3,300
Northern Indiana
Dunnuck Racing Offline
master
Dunnuck Racing  Offline
master

Joined: Mar 2007
Posts: 3,300
Northern Indiana
When I used the brake in my Challenger,I would set the limiter at 2500. Any higher than that and I was redlighting. When footbraking I was loading up against the convertor to 2000 to get the same r/t and 60'.
This was with a mild 440 that ran around 10.90's most of the time,for comparison.
Keith

Re: Launch RPMs.... [Re: tboomer] #1027190
07/06/11 12:40 PM
07/06/11 12:40 PM
Joined: Jun 2003
Posts: 52,972
Romeo MI
MR_P_BODY Offline
Master
MR_P_BODY  Offline
Master

Joined: Jun 2003
Posts: 52,972
Romeo MI
Quote:

Thanks,Greg! I need some different ideas...One thing I should say is that I have never scaled the car yet...




Ted I was looking at the vid again to see if you had
a lot of toe change... as you know the flex in the car
lifts the left front more than the right so the right
tire sets down first which for a brief second has the
control of the steering but the tire on your car doesnt
have anywhere near enough angle to cause the issue
so I'm back to you are turning the wheel

Re: Launch RPMs.... [Re: Dunnuck Racing] #1027191
07/06/11 12:50 PM
07/06/11 12:50 PM
Joined: Sep 2003
Posts: 2,008
Sweet Home Alabama
M
MRMOPAR622 Offline
top fuel
MRMOPAR622  Offline
top fuel
M

Joined: Sep 2003
Posts: 2,008
Sweet Home Alabama
On launch if you are not lined up straight or if you are a little out of the groove it will do that. It looked like you were lined up right,that's just something to check next time at the track. If I were were you before going back to the track I would switch the rear tires and see if it starts pulling to the right.


"To Be The Man'You Have Got To Beat The Man" "T/D and Pro-Bracket Racer"
Re: Launch RPMs.... [Re: MRMOPAR622] #1027192
07/06/11 01:03 PM
07/06/11 01:03 PM
Joined: Jan 2003
Posts: 25,969
United Socialist States of Ame...
T
tboomer Offline OP
Too Many Posts
tboomer  Offline OP
Too Many Posts
T

Joined: Jan 2003
Posts: 25,969
United Socialist States of Ame...
Some good thoughts here...Thanks! I never checked the rollout of the new tires,either..


Need your rear end checked out? Contact Grizzly!!
Re: Launch RPMs.... [Re: tboomer] #1027193
07/06/11 01:10 PM
07/06/11 01:10 PM
Joined: Apr 2004
Posts: 12,339
somwhere
S
smokinwoody Offline
I Live Here
smokinwoody  Offline
I Live Here
S

Joined: Apr 2004
Posts: 12,339
somwhere
on the two step..5000rpm chip with a 5500 stall converter

thats when we had the Duster...

Re: Launch RPMs.... [Re: tboomer] #1027194
07/06/11 05:28 PM
07/06/11 05:28 PM
Joined: Jul 2004
Posts: 4,384
Worst Weather USA
493_DART Offline
master
493_DART  Offline
master

Joined: Jul 2004
Posts: 4,384
Worst Weather USA
Quote:

Please critique the launch...
http://www.youtube.com/user/snomobileerion#p/a/u/2/2EM-wXamNNM




looks great to me ....

stop turnin the wheel !!



Re: Launch RPMs.... [Re: smokinwoody] #1027195
07/06/11 05:29 PM
07/06/11 05:29 PM
Joined: Jan 2003
Posts: 20,843
A collage of whims
topside Offline
Too Many Posts
topside  Offline
Too Many Posts

Joined: Jan 2003
Posts: 20,843
A collage of whims
You won't be inclined to turn the steering wheel if you hold it at the bottom, though some guys are reluctant to do that. Personally, I hold the wheel @ about 10:00. I don't like bracing my arm or locking it against anything solid; hard on the wrist if things go wrong. I don't keep a death-grip on the wheel either, something I learned on road courses; if the car goes where it's pointed, all you need to do is keep it pointed.

Re: Launch RPMs.... [Re: tboomer] #1027196
07/06/11 06:38 PM
07/06/11 06:38 PM
Joined: Sep 2006
Posts: 1,305
Hobart,Indiana
MoparPitBull Offline
Hollywood
MoparPitBull  Offline
Hollywood

Joined: Sep 2006
Posts: 1,305
Hobart,Indiana
3000

Re: Launch RPMs.... [Re: tboomer] #1027197
07/06/11 06:58 PM
07/06/11 06:58 PM
Joined: Jan 2003
Posts: 10,041
MN
J
JERICOGTX Offline
I Live Here
JERICOGTX  Offline
I Live Here
J

Joined: Jan 2003
Posts: 10,041
MN
Quote:

I have been thinking about going down a bit till I can get a handle on this thing...What do ya think? Ted




I knew you wore a skirt.

Page 1 of 3 1 2 3






Powered by UBB.threads™ PHP Forum Software 7.7.1