Ok how bout cat rockers? - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Ok how bout cat rockers?

Print Thread

Page 2 of 2

1

2

Re: Ok how bout cat rockers? [Re: shoebox] #1011350 06/13/11 02:11 PM 06/13/11 02:11 PM
Joined: Sep 2004 Posts: 567 Sth.IL dare_dude mopar
dare_dude mopar Joined: Sep 2004 Posts: 567 Sth.IL

Re: Ok how bout cat rockers? [Re: Moparmal] #1011351 06/14/11 02:03 AM 06/14/11 02:03 AM
Joined: May 2008 Posts: 5,399 Aurora, Colorado 451Mopar master
451Mopar master Joined: May 2008 Posts: 5,399 Aurora, Colorado	Quote: Go to Post #5 and work down....Ugly!! http://www.moparnuts.com/forums/showthre...light=440source The rockers pictured in that post are not the CAT stainless rocker arms. I have some CAT stainless rockers and they have bushings, and the body by the roller tip drops down to locate the valve stem. I have not used mine yet, but I was told the adjusters are not heat treated correctly? They came with stock looking stamped hold downs that could use some tweeking to get the rocker arms to locate over the valves better. I have some T&D hold downs and studs that I will probably use.

Re: Ok how bout cat rockers? [Re: 451Mopar] #1011352 06/14/11 02:54 AM 06/14/11 02:54 AM
Joined: Jan 2003 Posts: 3,943 Melbourne.....Oz-land Moparmal master
Moparmal master Joined: Jan 2003 Posts: 3,943 Melbourne.....Oz-land	The guy who made that post seems adamant they are CAT - however another guy in the thread raises the same question you have (see below) - It may be that CAT have changed their design at some point? Quote: The shape of the adjuster nose looks different then the 440Source ones too. Mine look meatier all the way around compared to the pics of your Cat ones. If mine somehow are Cat rockers, then it seems they may have made a 180 on their design engineering and quality control.

Page 2 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1