Ive got a champion sitting in the garage bought it colloecting part for my project when i went to intsall could not its all twisted and warped what a piece of [Edited by Moparts - Family Friendly Site - Keep it clean]

i've got a 22" in my 70 coronet.had to open up mounting holes and modify shroud and make brackets for it.i use a flex fan and spacer to put blades in the middle of opening.my 440 with a 180 stat run fine.

Hey,

I am sorry that I missed you and your request for a radiator. I did get a ton of calls this week with the heatwave that is going on.

For the guy that has the twisted radiator send me a PM or give me a phone call and I can get this swapped out free of charge.

For the gent looking for a radiator if you want the 22" the stock fan shroud will not fit on the 22" only the 26" radiator. Champion shortened the height on the 22" by 2" because of some issues with a-body core supports. I have a customer that bought one before the height adjustment and he put it in his demon without issue and it would not fit in my demon or my kids duster.

Anyhow, let me know if you picked one up or send me a PM with your phone number.

Craig
Russell Motorsports
760-267-1301

I got one for $100 from craigslist. It was a little beat up from it sitting in the guys house, was unused. It was not too bad to fit it. Had to drill some holes but clearance with the fan was decent. Had to turn the hoses a little and hold them while tightening the the clamps down. Still, happy with it. keeps it cool. 72 Plymouth Satellite 360