Are the transmission mounting bolts the same for a 727 and a 904? I'm doing a swap and have a 727 but not the mounting bolts for it. I don't want to go to bolt it to the engine and find out they're the wrong length, thread count, quantity etc..

Thanks

they worked for me when i swapped a 904-727

correct..same bolt right down to the torque converter bolts

i like to mark the flex plate and TC before I install them to save the hassle of alinement when it in there

you may want to check TC size to make sure you have the correct size flex plate

they have a small and big one and depends on the TC size

the TC does not swap between 727 & 904 either

make sure to swap the shift levers and throttle pressure valve lever from the one comeing out to the one going in.

those should stay with the car with either tranz

Thanks for all the info guys