Quote:

---

If you're talking about this intake:
http://cgi.ebay.com/ebaymotors/MOPAR-340...=item5882e82ab0

I recently got one from this seller. Be aware, it is NOT a Professional Products intake, it is a ProComp. Due to scheduling issues I haven't installed it yet, and I do have some apprehension about using it.

The casting has a crude appearance and there is definitely some core shift in the ports (they cleaned the edges with a burr, presumably to make the ports match). It may just have cosmetic issues and work A-OK -- or it might not seal.

I bought it specifically for teh LA/Mag bolting provisions and because I thought it was a Crosswind. Unless you are on a tight budget, or are willing to take a risk, or want both bolting provisions, I'd recommend getting an Eddy manifold.

For a little more slightly-related reading:
http://www.hotrodders.com/forum/procomp-single-plane-intakes-137169.html

---

a chinese knockoff company was copied and undercut by another chinese knockoff company? isn't anything sacred?