Quote:

I'm putting the stock 5.9 Magnum roller in my '87 318 to go in the 64DOG. It's bigger than the 318 roller, about like the 360 stock cam. But I'm running 3.23s and 32.5" tall rears so torque is important.

My question is what water pump to use on the 87 block to make the radiator hoses line up on the 64 318Poly radiator?

Thanks,
R.



say bye bye to your engine in short order...as far as I remember, OEM magnum cams don't have the oil holes in the #2 & #4 cam journals to oil the top end of an LA motor.

for $150, have bullet cams regrind your LA roller with their HR259/316 or HR258/320 lobe, and on the LA use comp #901's or hughes #1110 springs, eliminating exhaust rotators if you have them.

1976 Spinnaker White Plymouth Duster, /6 A833OD
1986 Silver/Twilight Blue Chrysler 5th Ave HotRod **SOLD!***
2011 Toxic Orange Dodge Charger R/T
2017 Grand Cherokee Overland
2014 Jeep Cherokee Latitude (holy crap, my daughter is driving)