Quote:

---

Quote:

---

Hay Rick .. would a 1/2" breaker-bar fit on the tensioner ? Also ... I hear that the pass side motor mount should be uNconnected ...and the motor dropped down slightly ... ??

---

Doubtfull on the breaker bar, unless it is real thin..You only have maybe a inch in that area.

I`m cheap so rather than buy the trick ratcheting ones, I made my own out of 1/2 square stock and a piece of 3/16 x 1" flat stock.

I personally don`t take the mount loose..that is taking WAY more off than needed...I never even open the hood until I refill it.

Rick

---

Thats how I do them. All from the bottom.
And be very carefull not to break off the bolts holding the water pump on! If they dont want to come out, A little heat on the housing helps.

IIRC they pay around 1.7 hours to do.