|
|
Re: Difference btwn '68 vs '69 B-bdy dash wiring harnesses?
[Re: JohnRR]
#997415
05/23/11 03:04 PM
05/23/11 03:04 PM
|
Joined: Jan 2003
Posts: 21,528
N.E. OHIO, USA
A12
OP
Too Many Posts
|
OP
Too Many Posts
Joined: Jan 2003
Posts: 21,528
N.E. OHIO, USA
|
Quote:
Quote:
Fuse box location is different if that matters
Fuse box is in the same basic location just accessed differently , underdash vs thru the open glove box.
The connector on the ignition switch is the same one has an extra wire the other does not going by memory when I owned both and stripped both .
John, I checked the ignition switch connection/wiring on the harness that I have in hand at the moment (have another at home) to the wiring schematics here http://www.mymopar.com/downloads/1968/68BelvedereGTXSatelliteRoadRunnerA.JPG and here http://www.mymopar.com/downloads/1969/69BelvedereGTXSatelliteRoadRunnerA.JPG and there is no extra wire that I can see, only a different routing of the dark blue wire but still the same number of wires. Now the only thing that I can see that might denote a '68 from a '69 is that the list of circuits is alpha characters for the '68 and numerical for the '69 for the instrument lights, high beam indicator, temp gauge, gauge feed etc. (see the attached links to wiring diagrams. The under dash wiring harness I have has alpha characters and I'll check the one I have at home to see which characters it has......I hope numerical 
Mike
|
|
|
|
|
|
|
