turn signal problem

Print Thread

Re: turn signal problem [Re: 383man] #989892 05/15/11 05:00 PM 05/15/11 05:00 PM
Joined: Nov 2010 Posts: 204 washington A AB&E OP enthusiast
AB&E OP enthusiast A Joined: Nov 2010 Posts: 204 washington	Quote: If it lights up on the hazzard flashers then it would have to be the turn signal switch. Thats because both the turn signal and hazzard circuts share the same wires from the switch to the lights out front. It just changes the power source that feeds it in the switch. Turn signals are ign feed and hazzards are hot all the time. If you can get a wiring schematic just find the right color feed to that front circuit and test it at the switch for 12 volts coming out of it with the key on and turn signal on. If it has no power like that it is the switch since the other lights work and share the same feed. Ron Well problem solved Had an extra coulmn so swapped out switch and all is legal thanks for the help this has been like this since ECS restored column. though I remember shipping box damaged (ups) & the lever was sloppy. thanks again guys I DISLIKE WIRING IT SUCKS.

Hop To