rebushing throttle bores, what to use

Print Thread

Re: rebushing throttle bores, what to use [Re: RapidRobert] #987355 05/07/11 01:25 PM 05/07/11 01:25 PM
Joined: Aug 2009 Posts: 113 utah J jjl member
jjl member J Joined: Aug 2009 Posts: 113 utah	Yes, goodson sells them and the related tooling.As a side note,If the rebuild is basically stock you can get + .o15 valves.Larger on the stems and the valve diameter. formally orangemonster

Entire Thread
Subject	Posted By	Posted
rebushing throttle bores, what to use	RapidRobert	05/07/11 02:11 AM
Re: rebushing throttle bores, what to use	jjl	05/07/11 02:38 AM
Re: rebushing throttle bores, what to use	RapidRobert	05/07/11 02:42 AM
Re: rebushing throttle bores, what to use	jjl	05/07/11 05:25 PM
Re: rebushing throttle bores, what to use	SattyNoCar	05/07/11 03:14 AM
Re: rebushing throttle bores, what to use	RapidRobert	05/07/11 03:17 AM
Re: rebushing throttle bores, what to use	dOc !	05/07/11 04:09 AM
Re: rebushing throttle bores, what to use	RapidRobert	05/07/11 04:44 AM
Re: rebushing throttle bores, what to use	dOc !	05/07/11 04:49 AM
Re: rebushing throttle bores, what to use	John_Kunkel	05/07/11 10:35 PM
Re: rebushing throttle bores, what to use	RapidRobert	05/08/11 12:58 AM
Re: rebushing throttle bores, what to use	ScottSmith_Harms	05/08/11 01:45 AM
Re: rebushing throttle bores, what to use	RapidRobert	05/08/11 01:48 AM
Re: rebushing throttle bores, what to use	ScottSmith_Harms	05/08/11 01:51 AM
Re: rebushing throttle bores, what to use	RapidRobert	05/08/11 01:54 AM

Hop To