in need of a little help... just picked up a B&M 144 for my mopar 318 for in my 1948 dodge coupe a little about it the 318 is a stock bottom end had a little head work done and a mopar purple shafe cam (from what i get from mopar it is nother more than a modern 340mopar came 1200to 3500 rpm range with a proforma intake and a 600cfm elderbrock trans is a stock early 518 2 wire rear is a ford 8.8 with a 3.23 gear will be running 1989/1992 magnum exhust thru 2.5 inch pipes can anyone tell me if it should be ok for a street driver (well never see the dragstrip) any help on parts for the B&M 144 let me know