383 Crank End Play.... - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer 383 Crank End Play....

Print Thread

383 Crank End Play.... #980998 04/26/11 04:13 PM 04/26/11 04:13 PM
Joined: Feb 2007 Posts: 217 New Port Richey, Florida Wolfe440 OP enthusiast
Wolfe440 OP enthusiast Joined: Feb 2007 Posts: 217 New Port Richey, Florida	I'm messing with a center thrust crank bearing on a 383, does anyone make an oversize bearing to reduce the crank end play? I thought I read once its available. I got about .010 too much end play. If available any sources? Thanks, Wolfe.

Entire Thread
Subject	Posted By	Posted
383 Crank End Play....	Wolfe440	04/26/11 08:13 PM
Re: 383 Crank End Play....	471Magnum	04/26/11 11:29 PM
Re: 383 Crank End Play....	471Magnum	04/26/11 11:31 PM
Re: 383 Crank End Play....	Wolfe440	04/27/11 01:56 AM
Re: 383 Crank End Play....	Dcuda69	04/27/11 02:19 AM
Re: 383 Crank End Play....	Wolfe440	04/27/11 02:30 AM
Re: 383 Crank End Play....	Dcuda69	04/27/11 02:37 AM
Re: 383 Crank End Play....	Wolfe440	04/27/11 04:48 AM
Re: 383 Crank End Play....	Cab_Burge	04/26/11 11:38 PM
Re: 383 Crank End Play....	dOrk !	04/26/11 11:53 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1