Quote:

Loosening the bolts won't help unless you take the carrier out of the case, the side bearings will hold the two halves together... If you decide to take it apart measure the backlash first mark the adjusters & the caps... Count the turns .. The thing is if the clutches are good you'll have a hard time getting enough torque on the axles with the unit not solidly mounted in the car... As mentioned, one tire on the ground then either a bar or I've used the other wheel to get leverage to turn the axle forcing the clutches to slip.. While turning push inward.... It make take turning forward and rearward but it will go...



I agree , put it back in the car .