Quote:

---

I am getting ready to place an order and am needing advice on the 650 Thunder Series carb

I am using the performer RPM intake on a 383 and 727 combo.

The car right now has the original 318 and 2bbl carb.

Is there any special linkage or anything to make this carb work on my '68 b body? Specifically a throttle adapter or for the electric choke?

Thanks

---

I am definately no carb expert, but I went from a 318/904 2bbl to a 360/904 4bbl. I had to pick up a 4bbl kickdown linkage setup, complete with the throttle position lever that bolts to the trans, and make adjusting bends in the bar that runs from the carb to the trans lever. With the help of guys here I was able to get my cobbled mess straightened out, and get my shift points set correctly. There is a throttle adapter bracket for Mopars but I set mine up without it and all is well. I did order one, but never put it on because I didnt want to have to re-bend the bar in the kickdown linkage.


roe