Quote:
Or did you mean where the trans mounts on the bell housing---those lower holes to relation of the oil pan rail?
From what I have seen of engines in cars, stock pan tp stock pan, the bottom of a BB and SB pan sits in about the sam location in relation to the bottom of the K-frame when in the vehicles.
Don't know if that'll help you at all.
Yes, where the trans bolts to the bellhousing.
That is good info on oil pans (bb and sb) sitting in the same spot.
72 RR, Pump gas 440, 452s, 3800 lbs, Corked, ET Radials,. 11.33@117.72.
Same car, bone stock 346s, 9.5 comp, baby solid. 12.24@110.
| 
