Rockers for 440 build- stamped or roller?

Print Thread

Re: Rockers for 440 build- stamped or roller? [Re: DaytonaTurbo] #963860 04/01/11 07:32 PM 04/01/11 07:32 PM
Joined: Jan 2007 Posts: 7,664 IN A ahy master
ahy master A Joined: Jan 2007 Posts: 7,664 IN	Quote: Will need to know the specs on the cam and valve springs before anyone can make a recommendation. Why would you need adjustable pushrods? I ran a lunati voodoo 60303 cam with stock rockers and stock pushrods. Rule of thumb is HD stamped rockers are good for .5" lift. Perhaps a bit more on a moderate RPM stroker with moderate springs. It depends on the cam/spring combo.

Entire Thread
Subject	Posted By	Posted
Rockers for 440 build- stamped or roller?	70Sbird	04/01/11 08:11 PM
Re: Rockers for 440 build- stamped or roller?	JohnRR	04/01/11 08:40 PM
Re: Rockers for 440 build- stamped or roller?	70Sbird	04/01/11 08:52 PM
Re: Rockers for 440 build- stamped or roller?	DaytonaTurbo	04/01/11 09:17 PM
Re: Rockers for 440 build- stamped or roller?	ahy	04/01/11 11:32 PM
Re: Rockers for 440 build- stamped or roller?	dOoC	04/01/11 11:47 PM
Re: Rockers for 440 build- stamped or roller?	70Sbird	04/02/11 02:02 AM
Re: Rockers for 440 build- stamped or roller?	70Sbird	04/02/11 02:06 AM
Re: Rockers for 440 build- stamped or roller?	ahy	04/02/11 02:13 AM
Re: Rockers for 440 build- stamped or roller?	fourgearsavoy	04/02/11 02:30 AM
Re: Rockers for 440 build- stamped or roller?	JohnRR	04/02/11 03:27 AM
Re: Rockers for 440 build- stamped or roller?	DaytonaTurbo	04/02/11 07:44 AM
Re: Rockers for 440 build- stamped or roller?	mikemee1331	04/01/11 10:55 PM

Hop To