pushrod length - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer pushrod length

Print Thread

pushrod length #954504 03/20/11 02:01 PM 03/20/11 02:01 PM
Joined: Aug 2003 Posts: 1,062 Amherst,NY challengermike OP super stock
challengermike OP super stock Joined: Aug 2003 Posts: 1,062 Amherst,NY	If you go with a .018 thinner headgasket could you still get away with the same pushrods on a hydraulic lifter engine?

Entire Thread
Subject	Posted By	Posted
pushrod length	challengermike	03/20/11 06:01 PM
Re: pushrod length	RapidRobert	03/20/11 06:26 PM
Re: pushrod length	challengermike	03/20/11 06:45 PM
Re: pushrod length	RapidRobert	03/20/11 06:57 PM
Re: pushrod length	lokalik	03/20/11 07:53 PM
Re: pushrod length	challengermike	03/20/11 08:52 PM
Re: pushrod length	JohnRR	03/20/11 08:57 PM
Re: pushrod length	challengermike	03/20/11 09:05 PM
Re: pushrod length	JohnRR	03/20/11 09:07 PM
Re: pushrod length	challengermike	03/20/11 09:11 PM
Re: pushrod length	MoparforLife	03/20/11 09:21 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1