Like LA360,s link shows, your ackerman will be reversed. You will need to bend the steering arms out past the center to correct it. Extend the imaginary line from the center of the axel past the front of the balljoint for its correct location.

Its best to use the correct side balljoint/steering arm and just make your own font steering arm. You can leave the original steering arm hang out the back in its original location or you can cut it off.

Further the rack wants to be further back then the inside of the kframe will allow. So you need to modify the kframe to allow for that or fab a draglink type set up off the racks ends and make new inner mount tierod mounts that will position the tierods further back.