Quote:

---

1/2" spacers, and it still will not fit under the hood. you will need to loose about 1 1/2- 2",for it to fit under your stock hood. i've tried this already on my cars....

---

Thanks for the replies Old School. Nick did say that after the shimming of the K-member if it still requires clearance that we would then probably mill the intake. As Nick said, there is more then one way to skin a cat.

I want to also extend my thanks to everyone for all the informative and helpful replies on this post as well as another post. Your experience and wisdom has been my guide in this endeavor of my first B-body big block car.