Welders: Welding Cast Iron Bellhousing

Print Thread

Welders: Welding Cast Iron Bellhousing #940475 03/01/11 11:40 AM 03/01/11 11:40 AM
Joined: Jan 2003 Posts: 552 At Your Plymouth Dealers 440-6BBL OP super gas
440-6BBL OP super gas Joined: Jan 2003 Posts: 552 At Your Plymouth Dealers	I have a 440 bell housing with 2 small cracks, welder says he is finding it cracks at the end of the weld after welding. Has anyone here have experience with these? My welder says he thinks it may not be pure cast iron, possibly an alloy mix. Any help would be great. TIA

Entire Thread
Subject	Posted By	Posted
Welders: Welding Cast Iron Bellhousing	440-6BBL	03/01/11 03:40 PM
Re: Welders: Welding Cast Iron Bellhousing	JohnRR	03/01/11 03:43 PM
Re: Welders: Welding Cast Iron Bellhousing	Von	03/01/11 03:48 PM
Re: Welders: Welding Cast Iron Bellhousing	440-6BBL	03/01/11 05:06 PM
Re: Welders: Welding Cast Iron Bellhousing	JohnRR	03/01/11 05:25 PM
Re: Welders: Welding Cast Iron Bellhousing	440-6BBL	03/01/11 05:29 PM
Re: Welders: Welding Cast Iron Bellhousing	bomber1965	03/02/11 02:25 AM
Re: Welders: Welding Cast Iron Bellhousing	DAYCLONA	03/01/11 03:47 PM

Hop To