Quote:

---

Quote:

---

When I put the Wilwood rear disc brakes on my Daytona with a Dana 60, I had to drill out the hats for the 5/8 drive studs in the Strange axles. I used a Unibit to drill them out. I also had to space the axles out to center the rotor in the mount.

---

dont you shim the calliper to fit the rotor spacing?

---

Wilwood supplies thin shim washers to better center the caliper and on the pro-street brakes you can also mill down or add shim washers between the flange mount and caliper bracket.