Lifters not behaving.. - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Lifters not behaving..

Print Thread

Lifters not behaving.. #922444 02/06/11 05:25 PM 02/06/11 05:25 PM
Joined: Feb 2007 Posts: 217 New Port Richey, Florida Wolfe440 OP enthusiast
Wolfe440 OP enthusiast Joined: Feb 2007 Posts: 217 New Port Richey, Florida	Anyone had any problems with hydraulic Comp Cams High Energy lifters pumping up during run in? I have a new set and some are pumping up and firm and some are not after about two hours of run time. I have 40lbs of oil pressure at idle and 80+ at higher rpm. New in the box for a year and I only submerged them in oil before install, should I have done more? Thanks..

Entire Thread
Subject	Posted By	Posted
Lifters not behaving..	Wolfe440	02/06/11 09:25 PM
Re: Lifters not behaving..	RapidRobert	02/07/11 01:06 AM
Re: Lifters not behaving..	Wolfe440	02/07/11 05:06 AM
Re: Lifters not behaving..	RapidRobert	02/07/11 05:15 AM
Re: Lifters not behaving..	Wolfe440	02/07/11 05:23 AM
Re: Lifters not behaving..	52savoy	02/07/11 08:45 AM
Re: Lifters not behaving..	Viol8r	02/07/11 08:14 PM
Re: Lifters not behaving..	62maxwgn	02/07/11 09:22 PM
Re: Lifters not behaving..	602heavy	02/07/11 09:39 PM
Re: Lifters not behaving..	340rocks	02/10/11 01:25 AM
Re: Lifters not behaving..	RapidRobert	02/10/11 01:32 AM
Re: Lifters not behaving..	Wolfe440	02/11/11 04:25 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1