Quote:
With the 60302 cam and Comp 911 springs 1) coil bind is a non-issue right? since the lift is below 0.5" 2) for such a small cam shimming the springs is also is not an issue right? just pop in and run?
I run stamp steel rockers and the Comp 911 springs with a 0.518" lift cam. No problems.
I did run the XE262H Comp Cam in my 383, very similar to the Voodoo 301. It was a mild cam for a 383, but I'd wind the engine up to 5700k all day long. That's were it liked it. That's why I recommend the 302 for a 440. It's still gonna be rather mild for you, but should perform better than a stock HP cam.
|