Quote:

I swaped out the auto trans in my roadrunner for a a833 4 speed setup. I used the same driveshaft from the auto and the correct year manual trans cross member. I now have a very bad vibration at anything 60mph or over. If i press the clutch in when it vibrates no change.

I did notice that my drive shaft is pushed into the tail housing almost all the way to the yoke. Could this be the problem?



Is the vibration MPH related or RPM? I didn't see you mention what engine you have, Is the flywheel the correct balance for the engine?


Brewers Performance Inc.
4-speed transmission and parts specialists
PH 937-947-4416 or 937-698-4259
FAX 937-947-4419
www.brewersperformance.com