Quote:

Quote:

Quote:

the outer seal is the thin embossed metal shim seal behind the backing plate

the foam seal goes behind the bearing retainer and is to keep dirt out of the wheel bearing



Do you have part numbers for these?


I don't have the numbers but don't worry about the outer seal that is in the retainer.It is more of a dust seal than a grease sea and is only replaced when the bearing is replaced as it requires the bearing being removed to replace it. The inner seal is the important one as it keeps the rear end lube out of the bearing which is lubricated by packing with a needle and good wheel bearing grease.



I was looking for PNs specifically for the two parts I quoted. When I put inner seals in my last 8 3/4 I wanted a set of the two parts listed there and the local stores looked at me like I had two heads. I guess I could do a little more digging on my own.