904 clutch disc clearance

Print Thread

Re: 904 clutch disc clearance [Re: turbocolt2.4L] #899788 01/08/11 10:43 PM 01/08/11 10:43 PM
Joined: Jan 2003 Posts: 5,991 Anoka County, MN L Leigh master
Leigh master L Joined: Jan 2003 Posts: 5,991 Anoka County, MN	I built a E/SA 904 2 decades ago. That is the only 904/999 trans I have touched. However, from the 727 info I have collected, I would run .015 per disc on the front clutch, and .006 on the rear.

Hop To