I'm looking at a hyd. roller cam for a 360 cu in motor with Magnum heads, dual plane rpm intake and a carb.

looking at hughes "whiplash cams for magnum motors w/carbs"

they have one thats .544 lift, 222 degrees at .050, on a 107 LSA

how would this run compared to a similar cam that was custom ground, that's .566 lift, 214 degrees duration, and on a 108 LSA?


what would be the characteristics of each one?

trying to decide if the 2nd custom ground cam would work well for me, compared to the "hughes, custom cam for carb'd magnum" cam.

especially at half the price!