Head gasket thickness - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Head gasket thickness

Print Thread

Re: Head gasket thickness [Re: Dunnuck Racing] #866825 11/29/10 10:34 PM 11/29/10 10:34 PM
Joined: Apr 2009 Posts: 3,422 Toronto M mshred OP master
mshred OP master M Joined: Apr 2009 Posts: 3,422 Toronto	Quote: The 8553's I have on the shelf just measured in at .054".I have seen them advertised both ways,but that is what mine measure,for what it's worth. Keith Is that before install, or after removing them from being used?

Entire Thread
Subject	Posted By	Posted
Head gasket thickness	mshred	11/30/10 01:39 AM
Re: Head gasket thickness	Leon441	11/30/10 01:53 AM
Re: Head gasket thickness	mshred	11/30/10 01:56 AM
Re: Head gasket thickness	goldmember	11/30/10 02:01 AM
Re: Head gasket thickness	mshred	11/30/10 02:02 AM
Re: Head gasket thickness	goldmember	11/30/10 02:11 AM
Re: Head gasket thickness	S/ST 3040	11/30/10 02:13 AM
Re: Head gasket thickness	goldmember	11/30/10 02:16 AM
Re: Head gasket thickness	Leon441	11/30/10 02:20 AM
Re: Head gasket thickness	Dunnuck Racing	11/30/10 02:33 AM
Re: Head gasket thickness	mshred	11/30/10 02:34 AM
Re: Head gasket thickness	Dunnuck Racing	11/30/10 02:42 AM
Re: Head gasket thickness	mshred	11/30/10 04:47 AM
Re: Head gasket thickness	MR_P_BODY	11/30/10 05:28 AM
Re: Head gasket thickness	S/ST 3040	11/30/10 10:02 AM
Re: Head gasket thickness	mshred	11/30/10 02:19 AM
Re: Head gasket thickness	fasteddie	11/30/10 11:38 PM
Re: Head gasket thickness	mshred	11/30/10 11:46 PM
Re: Head gasket thickness	fasteddie	12/01/10 10:30 PM
Re: Head gasket thickness	mshred	12/02/10 03:07 PM
Re: Head gasket thickness	Max Weg	12/02/10 04:22 PM
Re: Head gasket thickness	mshred	12/07/10 06:38 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1