E-85 fuel pressure with a SV-1

Print Thread

E-85 fuel pressure with a SV-1 #863935 11/26/10 01:33 PM 11/26/10 01:33 PM
Joined: Mar 2010 Posts: 341 Highland beach Fl P poisondart2 OP enthusiast
poisondart2 OP enthusiast P Joined: Mar 2010 Posts: 341 Highland beach Fl	Little confused on what is good or not? I switched from a black Holley pump with 1/2 line (deadhead) to a Magnafuel 500 AN-10 line deadhead with the Prosystems regulator.The problem I have is that the inlets to the carb leak. Patrick told me that I needed Teflon washers, which I put on and stopped the leaks.The regulator shows 2 psi@ idle 12 psi @wot. The pump is set at 28psi. Is this to much and should I lower the pressure to the regulator? Anyone else had this problem?

Hop To