|
Re: Biggest c.i. & biggest bang for the buck on the cheap
[Re: Monte_Smith]
#863409
11/28/10 12:32 AM
11/28/10 12:32 AM
|
Joined: Aug 2008
Posts: 4,070 Mo.
racerx
master
|
master
Joined: Aug 2008
Posts: 4,070
Mo.
|
Quote:
I put enough nitrous through a 440-1 headed 446, to go 8.40s, at 3300lbs and that was on a stock block............however, I feel I was very lucky to have have never knocked the main webs out of the block and would not test my luck again. The B-1 that follwed that motor, went low 8s, but was built in a Mega-block.
If I was planning to heavily oxide an RB motor these days, even with stock heads, I WOULD upgrade to a good block, without question. Can you get by with a stock block......maybe....if it is prepped right, but with what it will cost to upgrade the stocker, you would nearly have the juice for the good block
Monte
Thaxx's Monte I always wanted to ask that ? on how fast on a stock block but didn't want to be bomb with the new block thing(even thou that is the way to go)just wondering how fast has one gone on a stock block.
|
|
|
|
|
|