timing issue - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech timing issue

Print Thread

timing issue #840447 10/27/10 08:18 PM 10/27/10 08:18 PM
Joined: Feb 2007 Posts: 352 Pennsylvania, USA Big_Fish OP enthusiast
Big_Fish OP enthusiast Joined: Feb 2007 Posts: 352 Pennsylvania, USA	What's the best way to dial in the timing I should set? I have a 440 stroked to 500 cubes, around 14:1 compression. Been running 34deg. Looking to make some adjustments and wondering if I should try 36 without detonation? Any experience or insight on this would be helpful.

Entire Thread
Subject	Posted By	Posted
timing issue	Big_Fish	10/28/10 12:18 AM
Re: timing issue	wheelsup68dart	10/28/10 12:21 AM
Re: timing issue	5spdcuda	10/28/10 12:30 AM
Re: timing issue	sixpackgut	10/28/10 03:01 AM
Re: timing issue	Big_Fish	10/28/10 03:12 AM
Re: timing issue	Triple Threat	10/28/10 03:48 AM
Re: timing issue	Cab_Burge	10/29/10 02:13 AM
Re: timing issue	Big_Fish	10/29/10 05:34 AM
Re: timing issue	Cab_Burge	10/29/10 06:23 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1