rocker adjusters and pushrod ends

Print Thread

rocker adjusters and pushrod ends #790629 09/02/10 07:35 AM 09/02/10 07:35 AM
Joined: Jul 2008 Posts: 16 UK U UKDART OP member
UKDART OP member U Joined: Jul 2008 Posts: 16 UK	I am runnin a solid cam with Crane Gold rockers which have a 5/16 adjuster balls and howards EDM lifters. Engine is RB stroker Indy heads.The adjusters and pushrod cup have started to wear away and the lifter ends also has signs of wear ,engine has approx. 20 runs. The pushrods are 3/8 diameter with 3/8 cup and ball they were supplied with the Indy heads and I had them cut to correct lenght.There are no oiling issues or signs of heat build up. Would this have been caused by using the 3/8 ended push rod and do I need to use 5/16 ends?

Entire Thread
Subject	Posted By	Posted
rocker adjusters and pushrod ends	UKDART	09/02/10 11:35 AM
Re: rocker adjusters and pushrod ends	Performance Only	09/02/10 12:19 PM
Re: rocker adjusters and pushrod ends	HardcoreB	09/02/10 01:12 PM
Re: rocker adjusters and pushrod ends	727specialist	09/02/10 04:28 PM

Hop To