450 ci sb - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer 450 ci sb

Print Thread

450 ci sb #770161 08/09/10 10:18 PM 08/09/10 10:18 PM
Joined: Aug 2006 Posts: 99 South Dakota W wireweld OP member
wireweld OP member W Joined: Aug 2006 Posts: 99 South Dakota	I have a set of eddy heads that were cnc ported by hughes engines. I am wondering if they would have enough flow for a 450 ci small block.

Entire Thread
Subject	Posted By	Posted
450 ci sb	wireweld	08/10/10 02:18 AM
Re: 450 ci sb	RapidRobert	08/10/10 02:24 AM
Re: 450 ci sb	wireweld	08/10/10 02:39 AM
Re: 450 ci sb	AndyF	08/10/10 03:24 AM
Re: 450 ci sb	wireweld	08/10/10 03:38 AM
Re: 450 ci sb	DusterKrazy	08/10/10 04:50 AM
Re: 450 ci sb	Reggie	08/10/10 05:28 AM
Re: 450 ci sb	AndyF	08/10/10 06:40 AM
Re: 450 ci sb	patrick	08/10/10 01:18 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1