318 to 360 - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer 318 to 360

Print Thread

Re: 318 to 360 [Re: patrick] #762830 08/02/10 04:07 PM 08/02/10 04:07 PM
Joined: Dec 2008 Posts: 27 Ca S speedy515 member
speedy515 member S Joined: Dec 2008 Posts: 27 Ca	Quote: Quote: Keep in mind driver's side motor mount ears are slightly different between 318 and 360 also. Just a little tweaking should be needed to make it work. Good luck ...or a small stack of flat washers.... Shumacher http://www.engine-swaps.com/ also sells a specific bracket for this swap.

Entire Thread
Subject	Posted By	Posted
318 to 360	bobs68	08/01/10 05:27 PM
Re: 318 to 360	closer9	08/01/10 06:18 PM
Re: 318 to 360	scratchnfotraction	08/01/10 06:38 PM
Re: 318 to 360	Alikazam	08/01/10 10:28 PM
Re: 318 to 360	patrick	08/02/10 12:55 PM
Re: 318 to 360	540challenger	08/02/10 02:15 PM
Re: 318 to 360	speedy515	08/02/10 08:07 PM
Re: 318 to 360	scratchnfotraction	08/02/10 09:27 PM
Re: 318 to 360	scratchnfotraction	08/02/10 09:32 PM
Re: 318 to 360	CUDAJAS	08/02/10 09:47 PM
Re: 318 to 360	scratchnfotraction	08/02/10 11:28 PM
Re: 318 to 360	OrangeProwler	08/02/10 06:48 PM
Re: 318 to 360	540challenger	08/02/10 06:51 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1