Quote:

Quote:

The part# is P1737725



i'm pretty sure that part # is for the intermediate shaft bushing.

a bronze gear and shaft is P3690875 and the cast iron gear is P3571071

Confirmed, P1737725 is the bushing.
Bronze gear oil pump drive P3690875, and the cast gear number is correct too for normal oil pump length (std or HV, internal pickup).

According to Andy's book there are 3 different shafts, the
factory replacement pump uses a 6.40" shaft,
the high volume alum pump from Milodon uses a 6.60" shaft,
the 7.0" shaft is used for oil pump systems where a spacer plate
is used for a second inlet system.....
this is measured from the bottom of the gear to the tip.

I measured 6-3/8" on an old stock one.