Need mopar part# for bronze dist. shaft/gear unit.

Posted By: Thumperdart

Need mopar part# for bronze dist. shaft/gear unit. - 07/24/10 12:17 AM

I`m in need of the part # for the direct connection/mopar perf. dist gear/shaft and can`t find it in my older books and the dealer only has the new books w/out any #`s.............anyone have the #? I run the hv pump.......thankxxx

Posted By: BloFish

Re: Need mopar part# for bronze dist. shaft/gear unit. - 07/24/10 12:33 AM

No, but I believe I have one hanging on the wall.

Posted By: Thumperdart

Re: Need mopar part# for bronze dist. shaft/gear unit. - 07/24/10 12:35 AM

Is it the right one and is it new or used?

Posted By: BloFish

Re: Need mopar part# for bronze dist. shaft/gear unit. - 07/24/10 12:39 AM

I bought it N.O.S. for my big block. Will that work for you?

Posted By: Thumperdart

Re: Need mopar part# for bronze dist. shaft/gear unit. - 07/24/10 12:42 AM

I`m not sure but when I changed mine over 3 years ago, I got it from the local dealer and I assume it`s correct seeing that I`ve got lots of miles on this thing.

Posted By: Mopar Racer

Re: Need mopar part# for bronze dist. shaft/gear unit. - 07/24/10 01:40 AM

The part# is P1737725

Posted By: Thumperdart

Re: Need mopar part# for bronze dist. shaft/gear unit. - 07/24/10 01:41 AM

Thankxx...........

Posted By: Performance Only

Re: Need mopar part# for bronze dist. shaft/gear unit. - 07/24/10 02:26 AM

Quote:

The part# is P1737725

i'm pretty sure that part # is for the intermediate shaft bushing.

a bronze gear and shaft is P3690875 and the cast iron gear is P3571071

Posted By: Thumperdart

Re: Need mopar part# for bronze dist. shaft/gear unit. - 07/24/10 02:34 AM

Quote:

Quote:

The part# is P1737725

i'm pretty sure that part # is for the intermediate shaft bushing.

a bronze gear and shaft is P3690875 and the cast iron gear is P3571071

Now I`m confused...I`ll shoot the #`s to the dealer tomorrow and see what they come up w/if Blowfish doesn`t have what I need.

Posted By: formula S

Re: Need mopar part# for bronze dist. shaft/gear unit. - 07/24/10 02:48 AM

Here it is http://www.summitracing.com/parts/DCC-3690875

Posted By: dusturbd340W5

Re: Need mopar part# for bronze dist. shaft/gear unit. - 07/24/10 02:48 AM

a bronze gear and shaft is P3690875 and the cast iron gear is P3571071

this is what my last catalog shows also

Posted By: Thumperdart

Re: Need mopar part# for bronze dist. shaft/gear unit. - 07/24/10 02:55 AM

Thankxx guys...........

Posted By: tubtar

Re: Need mopar part# for bronze dist. shaft/gear unit. - 07/24/10 02:58 AM

Summit says it ships Monday.
I bought mine on line from a dealer and got spanked price wise...........one in S.C.
I ordered a bunch of R-3 and W-9 stuff since they appeared to have it in stock.
This was the only part they had in stock and they were plenty proud of it.

Posted By: Performance Only

Re: Need mopar part# for bronze dist. shaft/gear unit. - 07/24/10 03:12 AM

Quote:

Summit says it ships Monday.
I bought mine on line from a dealer and got spanked price wise...........one in S.C.
I ordered a bunch of R-3 and W-9 stuff since they appeared to have it in stock.
This was the only part they had in stock and they were plenty proud of it.

if you ordered the smallblock bronze gear they're over 200.00 bucks now.

Posted By: Thumperdart

Re: Need mopar part# for bronze dist. shaft/gear unit. - 07/24/10 03:39 AM

Quote:

Summit says it ships Monday.
I bought mine on line from a dealer and got spanked price wise...........one in S.C.
I ordered a bunch of R-3 and W-9 stuff since they appeared to have it in stock.
This was the only part they had in stock and they were plenty proud of it.

I share an account at the dealer here locally so I`ll see how much $$$ tomorrow.

Posted By: 440Jim

Re: Need mopar part# for bronze dist. shaft/gear unit. - 07/24/10 02:31 PM

Quote:

Quote:

The part# is P1737725

i'm pretty sure that part # is for the intermediate shaft bushing.

a bronze gear and shaft is P3690875 and the cast iron gear is P3571071

Confirmed, P1737725 is the bushing.
Bronze gear oil pump drive P3690875, and the cast gear number is correct too for normal oil pump length (std or HV, internal pickup).

According to Andy's book there are 3 different shafts, the
factory replacement pump uses a 6.40" shaft,
the high volume alum pump from Milodon uses a 6.60" shaft,
the 7.0" shaft is used for oil pump systems where a spacer plate
is used for a second inlet system.....
this is measured from the bottom of the gear to the tip.

I measured 6-3/8" on an old stock one.