Quote:

---

I got new ones for an 90 318 pre-mag LA from advanced auto

they are the hollow ones and cost the same a stock solid ones for 83-84 LA318

one thing to look for on the heads are the larger push rod holes with the roller cams

early heads will need the hole clearanced and then will work as a roller head

I think I have a set of the solid pre-mag roller PR,I will measure them today,they will be the same as the hollow rods

the pre roller LA rods are 7.5 IIRC

---

Good info! My motor is already a roller so '90 pushrods and Magnum rollers would perfect for me. I plan on upgrading my cam and this would be a fantastic oiling upgrade for my motor while I'm doing it. Heck, I'll go to pullapart and snag me some magnum rollers for cheap. (Like I said, I'm a cheapo) I priced a cam from comp and its over 300 bucks. then I priced a cam and lifter set....and its over 800 dollars! I was like [Edited by Moparts - Family Friendly Site - Keep it clean]! 500 for lifters??? Insane! So its salvage for me!