we are finishing up putting 11.75 brakes on Jon's duster and the brake hose (where it bolts to the caliper)hits when we turn right(dr side), we have moved the hose to different spots and it still doesn't work, the caliper is mounted towards the front of the car as per the instructions on the BB dart site

"3. Replace Front Spindles with donor set, being careful not to mix up the left and right sides
(calipers to the front, steering arm/balljoint to the rear)"

so I would like to see a picture if any one has one to see how this should look.
also how does the spring clip go for the pin type caliper and pads Thanks in advance. Ron...