Quote:

Please check my logic on this.

The front valance lights are enclosed in a plastic housing, so there must be a ground wire in the pigtail right?

If the bulb has two filaments then there must be two supply wires in the pigtail right?

So that means the pigtail harness going into the front valance light has a total of three wires, is that right?



No, The front valance lights are grounded thru the housing, it's cast aluiminum. The plugs are color coded, one for the valance panel and one for the side markers. with single bullet connectors for the fender mounted turn lights being separate. All in the same wire harness.