Quote:

Start at one cylinder and finish the intake and exhaust valve both before moving on.Turn your motor over clockwise, when the exhaust valve starts just starts to open stop and adjust the intake valve.(adjust to whatever lash is required whether hydraulic or solid).Next continue to turn the motor clockwise watching the intake valve of the same cylinder. When the intake valve opens and almost completely shuts stop and adjust the exhaust valve. Now continue to the next cylinder. This is the proper way to lash your valves according to comp cams and many other manufacturers.




have used this method since it was taught to me 30 years ago

www.tandmautomotive-omaha.com