Timing cover crank seal - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Timing cover crank seal

Print Thread

Re: Timing cover crank seal [Re: OzHemi] #674035 04/18/10 09:05 PM 04/18/10 09:05 PM
Joined: May 2003 Posts: 15,487 Florida S scratchnfotraction I Live Here
scratchnfotraction I Live Here S Joined: May 2003 Posts: 15,487 Florida	the covers are different between SB & BB not sure on the seal swap myself,I just may learn something new here on this post but sb have 1 that goes in from the inside and 1 thats goes in from the out side on the t-coves so may depend on what seal your looking at for a sb to use on the BB I have a BB 440 and have not had the fun of a front seal yet

Entire Thread
Subject	Posted By	Posted
Timing cover crank seal	RoadRunnerJD	04/19/10 12:51 AM
Re: Timing cover crank seal	OzHemi	04/19/10 12:59 AM
Re: Timing cover crank seal	scratchnfotraction	04/19/10 01:05 AM
Re: Timing cover crank seal	MoparforLife	04/19/10 01:09 AM
Re: Timing cover crank seal	OzHemi	04/19/10 01:10 AM
Re: Timing cover crank seal	scratchnfotraction	04/19/10 01:13 AM
Re: Timing cover crank seal	OzHemi	04/19/10 01:35 AM
Re: Timing cover crank seal	RoadRunnerJD	04/19/10 01:13 AM
Re: Timing cover crank seal	OzHemi	04/19/10 01:32 AM
Re: Timing cover crank seal	MoparforLife	04/19/10 04:39 AM
Re: Timing cover crank seal	Dusted_Ya	04/19/10 05:19 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1